|
Rohrgröße:
|
150 mm 65 mm |
|
|
|
Help Text for Rohrgröße:
The main reason for selecting a 65 mm scale over a 150 mm scale is size constraints.
Your application may require a compact size flow meter. Selection of a 150mm scale size offers better resolution.
|
|
Gehäusematerial:
|
Aluminium Messing Edelstahl |
|
Help Text for Gehäusematerial:
Housing Material ::
Model S rotameters are available with Aluminum, Brass, or
316 Stainless Steel housing material and fittings. The choice of housing material
will depend on the type of fluid (gas or liquid) being used with the rotameter.
|
|
Ventil:
|
|
|
Help Text for Ventil:
Valve ::
- No valve frame, with flow tube
- complete rotameter frame and flow tube with no valve port
- No valve frame, no flow tube -
complete rotameter frame only; no flow tube included
and no valve port
- No valve, frame with valve port seal plug,
with flow tube - complete rotameter frame with valve port
for future valve installation (valve port has a removable seal plug)
and flow tube
- No valve, frame with valve port seal plug,
no flow tube - complete rotameter frame with valve port for
future valve installation (valve port has a removable seal plug); no
flow tube included
- CV™ valve at inlet, with flow tube
- complete rotameter frame, flow tube, and CV™ (needle) valve installed
at the inlet of the rotameter.
- CV™ valve at outlet, with flow tube
- complete rotameter frame, flow tube, and CV™ (needle) valve installed
at the outlet of the rotameter. This configuration is useful in vacuum
applications.
- MFV™ valve at inlet, with flow tube
- complete rotameter frame, flow tube, and MFV™ (high precision
metering) valve installed at the inlet of the rotameter.
- MFV™ valve at outlet, with flow tube
- complete rotameter frame, flow tube, and MFV™ (high precision
metering) valve installed at the outlet of the rotameter. This configuration
is useful in vacuum applications.
|
|
Dichtungen:
|
|
|
Help Text for Dichtungen:
Seals ::
As with your choice of housing material, model S rotameters
are available with Buna-N, EPR, PTFE/Kalrez®, and Viton-A® seals
and o-rings.
With Aluminum or Brass housing material, Buna-N is the default
seal material (Viton-A® for flow tube packings). Stainless steel housing
material has Viton-A® as it s default.
You may order in any desired
configuration (prices may vary). The choice of seals will depend on the
type of fluid (gas or liquid) being used with the rotameter.
|
|
Anschlüsse:
|
|
|
Help Text for Anschlüsse:
Fittings ::
There are a variety of end fittings available for you to choose
from. 1/8 inch FNPT fittings (inlet and outlet) are a standard option.
|
|
Optische Sensorschalter:
|
Nein Einzelner Sensor Doppelsensor Hi-Lo |
|
Help Text for Optische Sensorschalter:
Optical Sensor ::
Model S rotameters are available with an Optical Sensor Switch.
This is a noninvasive means for detection of HI or LOW flow. The sensor
is ideal for signaling an alarm, cutoff valve or other device when the float
passes the detector (alarm, valve, etc. not included).
This option is only available on single flow tube rotameters.
|
